Code overview
Content status: Verified
- Error code
- F24
- Appliance
- Dryer
F24 is a Maytag commercial dryer fault message with a short power reset listed.
Model compatibility: Maytag reuses codes across series and model years, so F24 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F24
F24 is listed for Maytag commercial dryers with a power reset and no stated cause.
Quick answer
F24 is a Maytag commercial dryer message without a stated cause. The listed remedy is a power cycle.
Power cycle for F24
| Order | Action |
|---|---|
| First | Breaker(s) off, wait 5 minutes |
| Second | Breaker(s) on |
| Third | Start a time dry cycle |
| Fourth | Check on the dryer for one minute |
See also:
- F22: reset-only code in the same range
- F26: close by, same advice
- F28: another one that shares the reset
Dryer repair across the metro areas
Maytag dryer calls from the Miami, New York, Houston, Los Angeles and San Diego metro areas go to (844) 415-0954. Before you ring, jot down the code, the model number and what you changed. See Maytag dryer repair.
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.