Code overview
Content status: Verified
- Error code
- E23
- Appliance
- Microwave
The oven did not reach pre-heat temperature within 30 minutes. Maytag recommends a one-minute power reset first.
Model compatibility: Maytag reuses codes across series and model years, so E23 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
E23
The oven did not reach pre-heat temperature within 30 minutes.
Reading the display
The display shows E23 after the oven fails to reach pre-heat temperature within 30 minutes. According to Maytag, the possible trouble spots are the heater, the appliance control board and the associated wiring. Applies to: Maytag over-the-range units.
Resetting step by step
To start, power down through the circuit breaker(s) for one (1) minute. After that, power the unit up by turning the breaker(s) on. Allow one (1) minute of monitoring so the code does not show again. Last, verify that the microwave runs.
If the display still reads E23, assistance from a qualified technician may be needed.
Also worth comparing
- E22: thermal sensor circuit reporting a short
- E24: overheat condition
- E21: thermal sensor circuit reading open
Where we provide Maytag microwave service
Call (844) 415-0954 from anywhere in the Miami, New York, Houston, Los Angeles and San Diego metro areas. We will want the code, the model number and a summary of what you tried. Visit oven repair for what a visit involves.
Source: E23 – Error Code – Over-the-Range Microwave – Maytag Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.