Code overview
Content status: Verified
- Error code
- 3D41
- Appliance
- Wall Oven
Maytag wall oven code 3D41: what the display means and the power reset steps to try.
Model compatibility: Maytag reuses codes across series and model years, so 3D41 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
3D41
Maytag lists this code with no stated cause, only a meat probe check and a power reset.
Fast facts
3D41: Maytag’s wall oven help lists the code, omits any cause, and recommends a probe check followed by a power reset.
The reset
- First, look at the meat probe and make sure it is seated in the receptacle. Maytag notes the location may vary.
- Step one is breaker(s) off.
- Sit tight for one minute.
- Then breaker(s) back on, and see if 3D41 is still lit.
- Last, verify the oven operation.
Related entries
- 3D32: probe check plus reset again.
- 3D31: another meat probe code.
- 3D51: control-related like this code.
If the reset leaves 3D41 on the display, get service involved.
Contact us for oven service
Service for Maytag wall ovens covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Call (844) 415-0954 and have 3D41, the model number and what you tried at hand. Related: oven repair.
Source: 3D41 Wall Oven – Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.