Code overview
Content status: Verified
- Error code
- F6 E0
- Appliance
- Wall Oven
What F6 E0 means on a Maytag wall oven and how to reset it.
Model compatibility: Maytag reuses codes across series and model years, so F6 E0 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F6 E0
Maytag lists this code but states no cause, only reset steps.
The oven shows F6 E0: a fault flagged by the Maytag wall oven control.
A quick power cycle
| Step | Action |
|---|---|
| Breaker off | Leave the circuit breaker(s) switched off for one minute. |
| Breaker on | Turn the circuit breaker(s) back on. |
| Monitor | Make sure the error code is not shown again. |
| Verify | Finish by verifying oven operation. |
If the display shows it again, ask for service.
Cause named by Maytag
The entry for F6 E0 on the Maytag help site is short: reset power, no cause named. It notes the code might show up when a cycle is started. The entry covers wall ovens in general, with no model list.
Other codes in this family
Related entries:
- F6 E1: an F6 code with a stated cause: the appliance manager control
- F6 E2: an F6 sibling that names the converter control
Book wall oven repair
Maytag wall oven repair is offered in the Miami, New York, Houston, Los Angeles and San Diego metro areas through (844) 415-0954 (see oven repair). Before calling, write down F6 E0, the model number and the steps you tried.
Source: F6 E0 – Error Code – Wall Oven – Product Help – Maytag product help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.