Maytag Washer E17 Error Code
E17 on a Maytag washer is generally linked to a possible heating-related problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.
Reviewed by Daniel Hayes · Last reviewed August 18, 2026
Code overview
Content status: Verified
- Error code
- E17
- Appliance
- Washer
E17 — commonly associated with a heating issue on a Maytag washer. Meaning can vary by model; verify before relying on it.
Model compatibility: Maytag reuses codes across series and model years, so E17 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
E17
On many Maytag washer models, the E17 code is commonly associated with a possible heating-related problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.
Symptoms you may notice
-
The washer shows E17 and results are cold or under-heated
-
The cycle runs longer than usual before E17 appears
-
Heating seems weak or absent when E17 is shown
Possible causes
-
A heating element or its relay
-
A control or sensor affecting heating
-
Limescale or wear reducing heat on some models
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm the appliance has power at the outlet
-
Allow the appliance to cool fully before any check
-
Perform a manufacturer-approved restart
-
Record the full model number before contacting a technician
Safety warning
Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
When to call a technician
If E17 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what E17 means on your specific model and resolve the underlying cause safely.
Likely related component Often related to the heating element or relay (varies by model).
Frequently asked questions
You can safely try the basic checks above and a manufacturer-approved restart. If E17 returns, the underlying cause needs a proper diagnosis. Because the meaning can vary by model, confirm against your documentation.
Not necessarily. Maytag reuses codes across series and model years, and the exact meaning can differ. Record your full model number so the code can be interpreted correctly.
Sources & references
- Maytag appliance user manual — error/display messages section
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.