Maytag Dryer F22
F22 on a Maytag dryer typically relates to an exhaust thermistor or temperature-sensing fault.
Reviewed by Daniel Hayes · Last reviewed August 18, 2026
Code overview
- Error code
- F22
- Appliance
- Dryer
F22 on a Maytag dryer typically relates to an exhaust thermistor or temperature-sensing fault.
Model compatibility: Maytag reuses codes across series and model years, so F22 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F22
The F22 code generally indicates the dryer control detected an exhaust thermistor problem that can affect drying temperature or stop the cycle.
Symptoms you may notice
-
F22 shown on the control
-
Clothes take too long to dry
-
Dryer may pause or overheat
Possible causes
-
A failing exhaust thermistor
-
A control-board sensing issue
-
A wiring or connector problem
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm the lint screen is clean
-
Check that the exhaust duct is not crushed
-
Note whether the drum still tumbles
Safety warning
Dryers involve line voltage, heat and rotating parts. Internal thermistor diagnostics should be left to a technician.
What not to attempt
- Do not bypass the thermistor
- Do not run the dryer with a blocked vent
- Do not open the control housing while powered
When to call a technician
If F22 persists after clearing lint and checking the vent, book a diagnosis to evaluate the thermistor and control.
Frequently asked questions
A restricted vent can contribute, but F22 specifically points to a thermistor or control fault worth diagnosing.
Pause use until temperature sensing is confirmed — overheating is a fire risk.
Sources & references
- Maytag Product Help — dryer error codes
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.