Maytag Dishwasher F09 Error Code
F09 on a Maytag dishwasher is generally linked to a possible water-intake or supply problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.
Reviewed by Daniel Hayes · Last reviewed August 18, 2026
Code overview
Content status: Verified
- Error code
- F09
- Appliance
- Dishwasher
F09 — commonly associated with a water-intake issue on a Maytag dishwasher. Meaning can vary by model; verify before relying on it.
Model compatibility: Maytag reuses codes across series and model years, so F09 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F09
On many Maytag dishwasher models, the F09 code is commonly associated with a possible water-intake or supply problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.
Symptoms you may notice
-
The dishwasher won’t fill or fills slowly and shows F09
-
The cycle pauses early with F09 displayed
-
You hear the dishwasher trying to draw water without success
Possible causes
-
A partially closed or restricted water supply
-
A kinked or blocked inlet hose
-
An inlet valve or flow-sensing issue
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
-
Confirm the water supply tap is fully open
-
Check the inlet hose for kinks
-
Perform a manufacturer-approved restart
-
Record the full model number before contacting a technician
Safety warning
Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.
What not to attempt
- Do not open internal panels or access high-voltage components
- Do not bypass door locks, safety switches or interlocks
- Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks
When to call a technician
If F09 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what F09 means on your specific model and resolve the underlying cause safely.
Likely related component Often related to the water inlet valve or supply (varies by model).
Frequently asked questions
You can safely try the basic checks above and a manufacturer-approved restart. If F09 returns, the underlying cause needs a proper diagnosis. Because the meaning can vary by model, confirm against your documentation.
Not necessarily. Maytag reuses codes across series and model years, and the exact meaning can differ. Record your full model number so the code can be interpreted correctly.
Sources & references
- Maytag appliance user manual — error/display messages section
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.