Maytag Range 3D12 Error Code Oven temperature sensor, control or wiring
Code overview
Content status: Verified
- Error code
- 3D12
- Appliance
- Range
3D12 on a Maytag range: the meaning, the reset sequence and service-center contact.
Model compatibility: Maytag reuses codes across series and model years, so 3D12 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
3D12
There may be a problem with the control, the oven temperature sensor, or the associated wiring.
The Maytag product help ties 3D12 to the control, the oven temperature sensor, or the associated wiring.
What to try for 3D12
Turn off the circuit breaker(s) for one (1) minute; this powers the unit down. Switch the circuit breaker(s) on again. Check the oven display during one (1) minute for any return of the code. Then run the oven to verify that it operates.
If the reset does not hold, contact service.
Reading the code
It applies to Maytag ranges, with no specific series called out.
Next codes to look at
See 3D11 because its page carries the same reset routine. Also 3D22, since its page carries the same reset routine. See 1D12 because its page carries the same reset routine.
Call the service center
Not cleared by the reset? The service center takes calls for the Miami, New York, Houston, Los Angeles and San Diego metro areas at (844) 415-0954. Give 3D12, the model number and the steps already done. Page: Maytag range repair.
Source: 3d12 – Error Code – Range – Product Help – Maytag Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.