Code overview
Content status: Verified
- Error code
- 1d12
- Appliance
- Wall Oven
Maytag wall oven code 1d12 explained, with the breaker reset from the help article.
Model compatibility: Maytag reuses codes across series and model years, so 1d12 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
1d12
possible trouble with the sensor that reads oven temperature, with the control, or with associated wiring.
The wall oven is flashing 1d12. Before anything else, read what Maytag says about this message.
Quick answer for 1d12
- Go to the panel and turn the oven breaker(s) off, timing one (1) minute.
- Turn the breaker(s) on again.
- Check the oven display for one (1) minute to see that nothing reappears.
- Verify that it operates.
What the code points to
Meaning: possible trouble with the sensor that reads oven temperature, with the control, or with associated wiring.
Compare with these Maytag codes
- Sister code with matching advice: 1d21
- Handled with the same breaker reset: 1d22
- Touch panel and keypad message: 1c32
When to call for help
Stuck with 1d12 after resetting? Hand the oven to a service technician.
Maytag oven service in your metro area
Reach the service line at (844) 415-0954 for a Maytag wall oven in the Miami, New York, Houston, Los Angeles or San Diego metro areas. Tell us the code, the model number and what the reset did. See also oven repair.
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.