Code overview
Content status: Verified
- Error code
- F0 E2
- Appliance
- Washer
An over-suds alert on Maytag washers. Detergent type and amount come first, then bleach and the bulk dispenser.
Model compatibility: Maytag reuses codes across series and model years, so F0 E2 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F0 E2
F0 E2 is an over-suds alert: suds are keeping the basket from reaching speed or are rising.
Too much foam is the story behind F0 E2 on Maytag washers. Suds can keep the basket from reaching speed, and the control reads the rising suds level.
Checks that apply to both series
- Confirm that HE (High Efficiency) detergent was used, and only the maker’s recommended amount of it.
- Think about bleach: “no splash” or “easy-pour” chlorine bleach has a thickening agent that can make extra suds.
- If the load came out wet, a Rinse/Spin cycle can give further rinsing.
Front load series
Expect an automatic suds reduction routine; the washer should be left to continue. The display may read Sud or Sd. With the Rinse light on it is clearing suds, but with Cycle Complete lit, rinsing or water removal may be incomplete. If your washer has a bulk dispenser, check whether it is enabled and which concentration level is set, because added detergent on top of it can create suds.
Top load series
After thickened bleach, Maytag says to run the washer empty with regular liquid bleach, or use a washer cleaning product, before the next load.
Compare with
Washer repair for suds and rinse problems
Technicians reach the Miami, New York, Houston, Los Angeles and San Diego metro areas. Book washer repair at (844) 415-0954 if the code stays after these checks, and state the detergent and bleach used.
Source: F0 E2 – Front Load Washer – Product Help – Maytag Product Help; F0E2 – Error Code – Product Help – Maytag Product Help
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Sources & references
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.