Code overview
Content status: Verified
- Error code
- F9 E1
- Appliance
- Washer
A Maytag washer showing F9 E1 is not draining correctly. Steps are split by front load and top load models.
Model compatibility: Maytag reuses codes across series and model years, so F9 E1 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
What this code means
F9 E1
F9 E1 is a long drain: the washer cannot drain correctly.
Quick summary
The washer cannot get rid of its water properly. Maytag lists F9 E1 for front load and top load washers.
Top load models
- The water level does not drop once the drain pump runs.
- Confirm the hose is not set too deep in the standpipe past the elbow, because that allows siphoning, back-flow into the tub, or a slow or missing spin.
- Do not modify the hose form, and keep tape off the connection.
- Remove any kink, and clear whatever blocks the drainpipe or the utility sink.
Front load models
- Drain time beyond about 8 minutes triggers the code.
- Hose end: no more than 4.5″ (113 mm) inside the drainpipe or tub. The U-shaped form sets the right length.
- Air gap: the hose stays loose but secure, with room for air to break suction.
- Standpipe: 96″ at most, 39″ at least.
- Drain pump filter (some models): behind the bottom dispenser drawer, and it needs occasional cleaning.
- Door seal (bellow): small drain holes inside it can clog.
- Detergent: HE only, because heavy suds delay draining.
See also
Compare F8E1 for slow filling, F8 E3 for overflow, and FC E0 for the front load code that calls for a 5 minute power reset.
Washer service in the Miami, New York, Houston, Los Angeles and San Diego metro areas
When the hose, filter and detergent checks do not clear F9 E1, the number for Maytag washer service in the Miami, New York, Houston, Los Angeles and San Diego metro areas is (844) 415-0954. Read about washer repair first if you like. Have the model number and a list of what you already checked ready.
Source: F9 E1 – Front Load Washer – Product Help; F9E1 – Error Code – Product Help; Error Codes in Front Load Washers
Safety warning
Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.