Skip to content
Appointment timing depends on ZIP, route capacity, appliance type, access and parts.
Maytag washers, dryers, refrigerators, dishwashers, ranges and more.
Safety & risks

When a Burning Smell Means Stop Immediately

A persistent burning smell is a stop-use warning, not a symptom to test through.

Safety & risks

When a Burning Smell overview

A burning smell from an appliance means stop using it first and investigate second. Some new appliances do give off a brief odor on first use, but a persistent, worsening, or electrical smell during normal use needs a professional look before the appliance runs again.

A sudden burning smell coming from an appliance is alarming, and it upends the day. The smell alone cannot tell you which part has failed, so gather observations that are safe and repeatable and that you can hand over if a Maytag service visit follows.

When a Burning Smell Means Stop Immediately
First checks

Start with the simple conditions

Switch the appliance off and keep everyone clear of it, and cut power only if you can without touching water, smoke, or a damaged connection. Do not force panels, fittings, or controls while you look. If a simple change alters the result, do not treat a single normal run as proof.

CaseOdor that lingers
What to doStop using it
AvoidRunning another cycle to test
CaseVisible smoke
What to doCall emergency help if required
AvoidOpening any panel
CaseNew appliance smell
What to doFollow the manual
AvoidBrushing off a smell that gets stronger

Some new appliances give off a brief odor on first use, whereas a smell that lasts, grows stronger, or seems electrical during normal use calls for a professional assessment. Notice whether the smell happens every time, only with one setting, or only after the appliance has been on for a while, because that pattern tells you more than restarting would. The difference that counts is whether it fades fast on a new appliance or lingers and builds on an older one.

Stop & call

Which burning smells have a simple explanation?

Maytag's support pages describe a few cases. A new dryer may give off a semi-burning or oily smell on first use, and the guidance is to run it empty for about 15 minutes. A new oven can smoke or smell from oils, insulation, or shipping tape, and the manual for one model suggests an empty bake at 350F for 60 minutes, repeated once or twice, without lining the oven bottom with foil.

A dryer can also carry in outside fumes. Because it pulls in room air, fresh paint, stain, or varnish nearby can transfer odor to a load. Do not run the dryer while refinishing is going on close by.

During a high-temperature oven self-clean cycle, fumes can harm some birds, so Maytag advises moving them to a closed, ventilated room.

Safe boundary

Safe checks that protect the appliance

The use-and-care manual describes the break-in advice and care steps for your model. Clean only parts it calls user-serviceable, use the products it recommends, and put every removable part back where it belongs.

  1. Write down any message on the display before clearing it.
  2. Look over the visible cord, plug, and vents without moving electrical connections.
  3. Do a single careful check instead of several quick ones.

Safe to try

  • Taking the appliance out of use
  • Opening a window if that is safe
  • Getting a diagnosis arranged

Leave to a technician

  • Searching inside while it has power
  • Covering up the smell
  • Carrying on as normal

Before the appliance runs again, make sure nothing is stuck to its surfaces or blocking its vents. Resetting repeatedly is unwise: it can cover up a fault that comes and goes and may leave heat where it should not be.

FAQ

Frequently asked questions

Editorial

About the author

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Reach us directly

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Appointment timing depends on ZIP, route capacity, appliance type, access and parts.
Call Book a Repair